NETGEAR ProSAFE SRX5308 - Page 28

Net Mode Configuration Commands
28
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Step 1 Format net wan port_setup configure <wan interface>
Mode net
Step 2 Format def_mtu {Default | Custom {mtu_size <number>}}
port_speed {Auto_Sense | 10_BaseT_Half_Duplex |
10_BaseT_Full_Duplex | 100_BaseT_Half_Duplex |
100_BaseT_Full_Duplex | 1000_BaseT_Full_Duplex}
mac_type {Use-Default-Mac | Use-This-Computers-Mac |
Use-This-Mac {mac_address <mac address>}}
failover_method type {None | WAN-DNS {failover_method
retry_interval <seconds>} {failover_method retry_attempts
<number>}| CUSTOM-DNS {failover_method dns_ipaddress_wan
<ipaddress>} {failover_method retry_interval <seconds>}
{failover_method retry_attempts <number>}|
Ping {failover_method ping_ipaddress_wan <ipaddress>}
{failover_method retry_interval <seconds>} {failover_method
retry_attempts <number>}}
upload_download wan_conn_type {DSL | ADSL | T1 | T3 | Other}
upload
_download upload_speed_type {56-Kbps | 128-Kbps |
256-Kbps | 384-Kbps | 512-Kbps | 768-Kbps | 1500-Kbps |
1544-Kbps | 10-Mbps | 44.736-Mbps | 100-Mbps | 1-Gbps |
Custom {upload_download upload_speed <speed>}}
upload_download download_speed_type {56-Kbps | 128-Kbps |
256-Kbps | 384-Kbps | 512-Kbps | 768-Kbps | 1500-Kbps |
1544-Kbps | 10-Mbps | 44.736-Mbps | 100-Mbps | 1-Gbps |
Custom {upload_download download_speed <speed>}}
Mode net-config [port_setup]
Keyword Associated Keyword to
Select or Parameter to Type
Description
MTU
def_mtu Default or Custom Specifies whether the default MTU or a custom
MTU is used. If you select Custom, you need to
issue the mtu_size keyword and specify the size
of the MTU.
mtu_size number The size of the default MTU in bytes for the WAN
port:
• If you have configured IPv4 mode, type a
number between 68 and 1500 bytes.
• If you have configured IPv4/IPv6 mode, type a
number between 1280 and 1500 bytes.