NETGEAR ProSAFE SRX5308 - Page 82

Net Mode Configuration Commands
82
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
Common settings
qos_type Rate-Control or
Priority
Specifies the type of profile:
• Rate-Control. Configure the keywords
and parameters in the Common settings
section and Rate control profile settings
section of this table.
• Priority. Configure the keywords and
parameters in the Common settings
section and Priority profile settings
section of this table.
interface WAN1, WAN2, WAN3, or
WAN4
Specifies the interface to which the profile
applies.
service_name
default_services
ANY, AIM, BGP,
BOOTP_CLIENT,
BOOTP_SERVER,
CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP,
DNS:TCP, FINGER, FTP,
HTTP, HTTPS, ICMP-TYPE-3,
ICMP-TYPE-4,
ICMP-TYPE-5,
ICMP-TYPE-6,
ICMP-TYPE-7,
ICMP-TYPE-8,
ICMP-TYPE-9,
ICMP-TYPE-10,
ICMP-TYPE-11,
ICMP-TYPE-13, ICQ, IMAP2,
IMAP3, IRC, NEWS, NFS,
NNTP, PING, POP3, PPTP,
RCMD, REAL-AUDIO, REXEC,
RL
OGIN, RTELNET,
RTSP:TCP, RTSP:UDP, SFTP,
SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP,
STRMWORKS, TACACS,
TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP,
IDENT, VDOLIVE, SSH,
SIP-TCP, SIP-UDP,
NFS-TCP, or RPC-TCP
Specifies the default service and protocol
to which the profile applies.
service_name
custom_services
custom service name The custom service that you have
configured with the security services add
command and to which the profile applies