Net Mode Configuration Commands
84
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
congestion_priority Default, High,
Medium-high, Medium,
or Low
Specifies the priority queue that
determines the allocation of excess
bandwidth and the classification level of
the packets among other priority queues
on the VPN firewall:
• Default. Traffic is mapped based on the
ToS field in the packet’s IP header.
• High. This queue includes the following
DSCP values: AF41, AF42, AF43, AF44,
and CS4.
• Medium-high. This queue includes the
following DSCP values: AF31, AF32,
AF33, AF34, and CS3.
• Medium. This queue includes the
following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
• Low. This queue includes the following
DSCP values: AF11, AF12, AF13, AF14,
CS1, 0, and all other values.
hosts Single-IP-Address,
IP-Address-Range, or
Group
Specifies the IP address, range of IP
addresses, or group to which the profile is
applied:
• Single-IP-Address. The profile is
applied to a single IP address. Issue the
hosts_start_ip keyword to specify
the IP address.
• IP-Address-Range. The profile is
applied to an IP address range. Issue
the hosts_start_ip and
hosts_end_ip keywords to specify the
start and end IP addresses of the range.
In addition, issue the
bandwidth_allocation keyword to
specify if bandwidth is shared between
all IP addresses in the range or is
allocated to each IP address in the
range.
• Group. The profile is applied to a group.
Issue the hosts_group to specify the
group. In addition, issue the
bandwidth_allocation keyword to
specify if bandwidth is shared between
all members of the group or is allocated
to each member in the group.
hosts_start_ip ipaddress There are two options:
• The IP address if the hosts keyword is
set to Single-IP-Address.
• The start IP address if the hosts
keyword is set to IP-Address-Range.
Keyword (might consist of two
separate words)
Associated Keyword to
Select or Parameter to Type
Description
To Next Page
Loading...
