Obtain or select an IP address.
Highlight one of the following options and pr
ess J.
Choose the server type.
Highlight [FTP
], [SFTP] (SSH FTP), or [FTPS] (FTP-SSL) and
press J to display a dialog where you can enter the server
address.
Option Description
[Obtain
automatically]
Select this option if the netw
ork is configured to supply the IP address
automatically. A “configuration complete” message will be displayed
once an IP address has been assigned.
[Enter manually]
Ent
er the IP address and sub-net mask manually.
Press
J; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J to save
changes.
Next, press X; a “configuration complete” message will be displayed.
Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a “configuration
complete” message will be displayed.
Press J
to proceed when the “configuration complete” message is displayed.
346
F
TP Servers: Connecting via Wireless LAN
8
9
10
To Next Page
