Omron eCobra 600 - Page 105

Chapter 6: Maintenance
1
2
2
2
Figure 6-5. (1) Quill Shaft, (2) Vertical Groove Lubrication Points, Top-view Looking Down
1
Figure 6-6. (1)Upper Quill Spiral Groove Lubrication Point
6.
Press the brake button and move Joint 3 to the bottom of its travel.
Remove any existing grease with a clean, lint-free, soft cloth.
7.
Apply a small bead of grease to any grooves of the ball screw that are now exposed (see
14402-000 Rev. F eCobra User's Guide 105