Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-234
NS Series Programming Manual
6. Press and hold the Ctrl Key and bring the cursor close to the node to be deleted. When the cursor
shape changes to
, click on the node to be deleted.
7. Right-click to exit the node edit mode.
Label
This function sets labels. Refer to Labels in 2-8 Common Functional Object Functions for information
on basic settings. This section describes the settings for Multifunction Objects only.
The following methods can be used to switch labels using Multifunction Objects.
• Switch labels by pressing the Multifunction Object.
•
Switch labels when the specified bit address turns ON/OFF.
• Switch labels by turning ON/OFF a bit address or by pressing the Multifunction Object.
• Switch labels according to the contents of the specified word address.
• Read and display a label string from a specified file.
2
1
3

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)