Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-237
NS Series Programming Manual
Flicker (Extension Tab)
Make settings on the Flicker Tab Page to make functional objects flicker (flash). Refer to Flicker in 2-8
Common Functional Object Functions for information on basic settings. This section describes the set-
tings for Multifunction Objects only.
1
No. Item Details
1 Flicker Pattern Used to set either flicker according to the flicker colors selected under PT – Flicker
– Flicker settings or flicker using the ON/OFF colors set on the Color/Shape Tab
Page.
The Display ON and OFF Color Alternately Option can be selected only when the
following options are set under Flicker Pattern on the Color/Shape Tab Page.
Color when pressed
Bit address
Bit Address/Color when pressed
Size/Position (Extension Tab)
Displays and sets the size and position of functional objects. Refer to Size/Position in 2-8 Common
Functional Object Functions for details.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)