Omron NS Programming Manual

Section 2 NS Series Functions 2-15 Data Logs
2-340
NS Series Programming Manual
No. Setting Details
2 Scale Sets the scale for the time axis between 1 and 32,767. The time scale can be input
directly or, when the Set Button is pressed, an address can be specified indirectly.
Examples
When the sampling cycle is 1 s, the number of logged points is 20, and the time axis
scale is set to 10:
10 sec
Ten out of twenty logged points
(i.e., the points logged in a 20-s
p
eriod
)
are dis
p
la
y
ed
g
ra
p
hicall
y
.
When the sampling cycle is 1 s, the number of logged points is 10, and the time axis
scale is set to 20:
Ten points (i.e., the points
logged in a 10 - s period) are
displayed graph i cally.
20 s
Date and time
display
Sets whether or not the date and time will be displayed on the time axis.
Switch Sets the date and time display format for each label.
The date and time are displayed on the time axis scales as shown in the following
diagram.
3
Date Select
Date to display the date. Selects the date display format from the pull-down list.
Refer to
Date and Time Format under 2-8 Common Functional Object Functions for
details.
Time Select Time to display the time. Selects the time display format from the pull-down list.
Refer to
Date and Time Format under 2-8 Common Functional Object Functions for
details.
Text color
Sets the character color and font under the
Text Attribute Button. Refer to Labels and
Setting Colors under 2-8 Common Functional Object Functions for details.
4 Apply to All
Labels
Uses the date display method for the selected label for all labels. This setting is used
only for labels for which a date display and time display are selected. It is not used for
all labels for items set in the character attributes.
Apply to All Labels cannot be set in
the following cases.
• When the Date & Time Display Format Check Box is selected on the Edit/Display
Tab Page of the Option Dialog Box accessed by selecting
Tools - Option.
• When there is only one label.
• When a date display and time display are not selected (OFF).
Use Cursor Sets whether or not there will be a cursor on the time axis. Select Use cursor to use a
cursor. A vertical line will be displayed on the time axis if
Use cursor is selected. The
value for the position where the time axis cursor and the log graph cross is sent to a
specified address.
Touch any position on the object, except the scroll bar, to move the cursor to that
position. Alternatively, touch the Scroll Button for the time axis cursor.
5
Cursor Color Sets the cursor color (from 256 available colors).

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)