Omron NS Programming Manual

Section 2 NS Series Functions 2-17 Data Blocks
2-404
NS Series Programming Manual
CSV data file
1. Loading values to
PLC from CSV file.
2. Writing values from
PLC to CSV file.
No. Setting Details
1 Read data from CSV
file to PLC Data Block
Loads the specified record data from the CSV file to the communications ad-
dresses set in the fields.
2 Write data from PLC
Data Block to CSV file
Writes the data at the communications addresses set in the fields to the specified
records in the CSV file. Either overwriting the data at the specified record number
or inserting the data at the specified record number is selected.
3 Delete Record Deletes the data from the specified record number in the CSV file.
Loading/Writing between CSV Files and PT Memory
The command button data block control functions can be combined with Numeral Display & Input ob-
jects, Character Display & Input objects, and other functional objects to edit CSV files or to display only
the desired files on the screen.
CSV data file
4. Loading values to PT
memory from CSV file.
5. Writing PT memory
data to CSV file.
No. Setting Details
4 Read data from CSV
file to NS PT Memory
Loads the specified record data from the CSV file to the specified address in the
PT.
5 Write data from NS PT
Memory to CSV file
Writes one record of data stored at the specified address in the PT to the speci-
fied record in the CSV file. Either overwriting the data at the specified record
number or inserting the data in the specified record number is selected.
Writing/Loading PT Memory Data to/from Communications Addresses
Command button data block control functions can be used to write and load data between PT memory
and PLC memory areas.

Omron NS Specifications

General

Brand	Omron
Model	NS
Category	Touch terminals
Language	English