Omron Viper 650 - Solenoid Valve Specifications

32 Viper 650/850 Robot with eMB-40/60R User's Guide 05173-060 M
3.9 Air Lines and Signal Wiring
Solenoid Valve Specifications
Table 3-5. Solenoid Valve Specifications
Item Specifications
Valve Switching system 2-position double
Applicable fluid Air
Operating system Pilot type
Effective cross section
(Cv value)
1.2 mm
2
Lubrication Oilless
Operating pressure range 0.1 to 0.7 MPa (14 to 101 psi)
a
Response time 15 ms or less at 0.5 MPa (72.5 psi)
Maximum operating frequency 10 Hz
Ambient temperature -5 to 50° C (Dry air, non-condensing)
Solenoid Operating voltage 24 V ±10%
Power consumption (current) 0.5 W (21 mA)
Surge voltage protection circuit Zener diode
a
Note that the robot is rated at 0.1 to 0.39 MPa, 0.49 Max (14 - 56.6 psi, 71.1 Max). This
upper limit is lower than the solenoid's upper limit.