Omron Viper 650 - Chapter 11: Status Codes; 11.1 Introduction

Chapter 11: Status Codes
11.1 Introduction
Status Panel Display
The Status Panel Display is located near the top of the eMB-40/60R and typically on the robot
itself for eAIB robots. See the following figure.
M
A
Figure 11-1. (A) Status Panel Displays on eMB-40/60R and Viper
Status Panel
The status panel, shown in the preceding figure, displays alpha-numeric codes that indicate
the operating status of the eMB-40/60R. These codes provide details for quickly isolating prob-
lems during troubleshooting.
In the Status Panel Codes table, the '#' in the LED column represents a single digit. The digits
will be displayed as one of the following:
0 1 2 3 4 5 6 7 8 9
05173-060 M Viper 650/850 Robot with eMB-40/60R User's Guide 139