Oracle X6-2 - Install an Internal USB Flash Drive

Install an Internal USB Flash Drive
Servicing CRUs That Require Server Power-Off 115
FIGURE  22
Removing an Internal USB Flash Drive
Install an Internal USB Flash Drive
1.
Unpack the replacement USB flash drive.
2.
Insert the USB flash drive into the internal USB port (see Figure 22).
3.
Return the server to operation.
a.
Install the server top cover.
See “Install the Server Top Cover” on page 188.
b.
Close the fan door.
c.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 191.