Oracle X6-2 - Use the Oracle Ilom Web Interface for Immediate Shutdown

Use the Oracle ILOM Web Interface for Immediate Shutdown
Preparing for Service 55
The server powers down immediately.
3.
Disconnect the power and data cables from the server.
See “Disconnect Cables From the Server” on page 56.
Caution - When the server is powered down, it enters standby power mode In standby power
mode, power is still directed to the service processor remote management subsystem and power
supply fans. To completely power off the server, you must disconnect the power cords from the
power supplies.
Related Information
■
“Use the Power Button for Immediate Shutdown” on page 54
■
“Use the Oracle ILOM Web Interface for Immediate Shutdown” on page 55
Use the Oracle ILOM Web Interface for Immediate Shutdown
Caution - An immediate power down might corrupt system data, so only use this procedure to
power down the server after attempting the graceful power down procedure.
1.
Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information page appears.
2.
In the left pane, click Host Management → Power Control, and select Immediate
Power Off in the Select Action list.
3.
Click Save, then click OK.
The server powers down immediately.
4.
Disconnect the power and data cables from the server.
See “Disconnect Cables From the Server” on page 56.
Caution - When the server is powered down, it enters standby power mode In standby power
mode, power is still directed to the service processor remote management subsystem and power
supply fans. To completely power off the server, you must disconnect the power cords from the
power supplies.
Related Information
■
“Use the Power Button for Immediate Shutdown” on page 54
■
“Power Down Server Gracefully Using the Oracle ILOM CLI” on page 51
■
“Power On the Server” on page 194