Oracle X6-2 - Return the Server to the Normal Rack Position

Return the Server to the Normal Rack Position
Returning the Server to Operation 191
FIGURE  35
Returning the Server to the Rack
Figure Legend
1
Inserting mounting brackets into slide-rails
2
Slide-rail release tab (green)
3
Slide-rail lock
Related Information
■
“Remove the Server From the Rack” on page 58
■
“Remove Antistatic Measures” on page 190
■
“Reconnect Data Cables and Power Cords” on page 193
Return the Server to the Normal Rack Position
If the server is in the extended maintenance position, use this procedure to return the server to
the normal rack position.
1.
Push the server back into the rack, as described in the following steps.