Oracle X6-2 - Monitoring Components and Identifying SNMP Messages; Monitoring Component Health and Faults Using Oracle ILOM

Monitoring Components and Identifying SNMP Messages 251
Monitoring Components and Identifying SNMP
Messages
This section includes information about monitoring components and identifying SNMP
messages for the Oracle Server X6-2.
Description Links
Review how Oracle ILOM monitors component health
and faults.
“Monitoring Component Health and Faults Using Oracle
ILOM” on page 251
Review information about system components and
nomenclature.
“Monitoring System Components” on page 252
Review SNMP traps generated by the server. “Identifying SNMP Trap Messages” on page 263
Related Information
■
Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at: http://www.
oracle.com/goto/ilom/docs
Monitoring Component Health and Faults Using Oracle
ILOM
The Oracle ILOM 3.2 interfaces provide easy-to-view information about the health status of
system components. From the Oracle ILOM web interface or in the Oracle ILOM command-
line interface (CLI), you can collect system-specific information about the server, determine the
health state of discrete components, and view any open problems on the server. Oracle ILOM
automatically detects system hardware faults and environmental conditions on the server. If a
problem occurs on the server, Oracle ILOM will automatically do the following:
■
Illuminate the Service Required status indicator (LED) on the server front and back panels.
■
Identify the faulted component in the Open Problems table.
■
Record system information about the faulted component or condition in the event log.
For further information about administering open problems that are detected and reported by
Oracle ILOM, refer to “Administering Open Problems” in the Oracle ILOM Administrator's