Oracle X6-2 - Configure I;O Resource Allocation

Configure I/O Resource Allocation
Setting Up BIOS Configuration Parameters 223
The Option ROM screen for that internal device or add-in card slot appears.
5.
Select OpROM Enable and press Enter. Do one of the following:
■
Select Enabled to enable the Option ROM setting.
■
Select Disabled to disable the Option ROM setting.
6.
Press the F10 key to save the changes and exit the BIOS Setup Utility.
Related Information
■
“Using BIOS for Legacy Option ROM Resource Allocation” on page 209
■
“Access BIOS Setup Utility Menus” on page 203
■
“BIOS Setup Utility Menus” on page 202
■
“Exit BIOS Setup Utility” on page 224
Configure I/O Resource Allocation
1.
Access the BIOS Setup Utility menus.