Oracle X6-2 - About the Oracle Server X6-2; Product Description

About the Oracle Server X6-2 13
About the Oracle Server X6-2
These sections describe the controls, connectors, status indicators, system components, and
replaceable components of the server.
Note - Always update the server with the latest firmware, drivers, and other hardware-related
software by downloading the latest software release package when you first receive the server,
and for every new software release. For information about the software release packages and
how to download the software, refer to “Getting Firmware and Software Updates” in Oracle
Server X6-2 Installation Guide.
Description Links
Review the product description. “Product Description” on page 13
Learn about server controls and connectors. “About Controls and Connectors” on page 14
Learn about system components. “About System Components” on page 17
Product Description
The Oracle Server X6-2 is an enterprise-class, one rack unit (1U) server. It supports the
following components:
■
Up to two Intel processors. Processors with the following capabilities are supported:
■
22-core, 2.2 GHz, 145W processors
■
14-core, 2.6 GHz, 135W processors
■
10-core, 2.2 GHz, 85W processors
■
6-core, 3.4 GHz, 135W processors
■
Up to 12 DIMMs per processor for a maximum of 24 DDR4 DIMMs and a maximum of 1.5
TB of memory are supported in dual-processor systems. A maximum of 12 DDR4 DIMMs
and a maximum of 768 GB of memory are supported in single-processor systems. RDIMMs
(16 GB and 32 GB) and LRDIMMs (64 GB) are supported.
■
Four PCIe Gen3 slots in dual-processor systems: one slot, slot 4, is dedicated to the internal
HBA. PCIe slot 1 is nonfunctional in single-processor systems.
■
Four Ethernet ports (NET0, NET1, NET2, and NET3 located on the rear of the server) are
supported on dual-processor systems.