Remove the Internal HBA Card From PCIe Slot 4
142 Oracle Server X6-2 Service Manual • June 2016
See “Remove a Fan Module” on page 76.
2.
Remove the PCIe riser from slots 3 and 4.
For instructions, see “Remove the PCIe Riser From PCIe Slots 3 and 4” on page 103.
3.
Remove the internal host bus adapter card from the riser.
a.
Hold the riser in one hand and use your other hand to carefully remove the
card from slot 4 of the riser.
b.
Disconnect the rear bracket attached to the PCIe card from the rear of the
PCIe riser.
To Next Page
Loading...
