Oracle X6-2 - Page 174

Remove the Internal HBA SAS Cable Assembly
174 Oracle Server X6-2 Service Manual • June 2016
c.
Attach an antistatic wrist strap to your wrist, and then to a metal area on the
chassis.
See “Take Antistatic Measures” on page 59.
d.
Remove the server top cover.
See “Remove the Server Top Cover” on page 60.
2.
Remove all of the server fan modules.
See “Remove a Fan Module” on page 76.
3.
Remove the PCIe riser from PCIe slots 3 and 4.
See “Remove the PCIe Riser From PCIe Slots 3 and 4” on page 103.
4.
To disconnect each SAS cables from the disk backplane, press the latch on the
cable connectors and pull the connectors out. [1].