Oracle X6-2 - Page 186

Install the Power, FIM, Disk Backplane Data, and DVD Cables
186 Oracle Server X6-2 Service Manual • June 2016
6.
Return the server to operation.
a.
Install the server top cover.
See “Install the Server Top Cover” on page 188.
b.
Close the server fan door.
c.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 191.
d.
Power on the server.
See “Power On the Server” on page 194.
Verify that the Power/OK status indicator is steady on.
Related Information
■
“Removing the Power, FIM, Disk Backplane Data, and DVD Cables” on page 182