341
DP-2330/3030
MAR 2005
Ver. 2.1
DP-2310/3010
(36) Place the Finisher on the Base Bracket.
Note:
Make sure that 2 Lock Levers Hook into the
Guide Bracket properly.
(37) Install 2 Slide Guide Brackets.
(38) Secure 2 Slide Guide Brackets with 2 Silver
Thumb Screws (PF4124P023).
(39) Install the Finisher Tray Assembly.
(40) Secure the Finisher Tray Assembly with
2 Snap Rings.
(41) Close the Rear Cover and reinstall all Covers.
(42) Connect the Finisher to the Host Machine with
the Interface Cable.
(43) Plug the AC Power Cord into the wall outlet and
turn the Main Power Switch on the Back and the
Power Switch on the Left Side of the machine to
the ON position.
To Next Page
Loading...
