372
DP-2330/3030
MAR 2005
Ver.2.1
DP-2310/3010
8.32.2. Installation
Before installing the Dehumidifier Heater Kit (DZTQ000049), make sure the Dehumidifier Heater
Kit (DZTQ000048) is installed in the unit first.
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
<For 2-Paper Tray Configuration>
(1) Open the Right Cover.
(2) Remove 2 Silver Screws.
(3) Remove the Right Rear Cover.
(4) Remove 4 Silver Screws.
(5) Remove 2 Lower Rear Covers.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light (even if
it is a 1000-Lux fluorescent lamp).
(6) Slide the 1st and 2nd Paper Trays out.
(7) Remove 8 Screws.
(8) Remove 4 Brackets.
(9) Remove 4 Silver Screws.
(10) Open the Rear Cover.
To Next Page
Loading...
