Planmeca ProOne - Adjusting Imaging Position for Sinus Exposures

Chapter A: GENERAL & TECHNICAL DATA 10 PROONE WEB PAGES
Technical manual Planmeca ProOne 29
Calibration values
The calibration values page contains the unit’s serial number, the current date and time,
and two tables including the following numerical data: Collimator calibration: collimator
position, front blade; Patient support calibration: C-arm position.
NOTE
The calibration values can also be viewed through the Technical settings tab on the unit’s
control panel. See Calibration values, section 4.4 "Technical: Calibrations (T3400)" on
page 65.