Chapter A: GENERAL & TECHNICAL DATA 10 PROONE WEB PAGES
Technical manual Planmeca ProOne 27
10 PROONE WEB PAGES
The ProOne web pages can be accessed with a web browser at the address: http://
(unit’s IP address). For instructions where to find your X-ray unit’s IP address see
Section 2.4 "User: Network settings (U1400)" on page 39.
The ProOne main page contains the following information: the unit’s serial number,
CPU PCB version, PSU PCB version, software version, and the current date and
time.
Through the links provided on the main page you can carry out the
beam check
, view
the
error history
and the
calibration values.
Beam check
For detailed instructions on how to perform a beam check see section 1.10 "Step 7:
Taking beam check exposure" on page 111.
To Next Page
Loading...
