Planmeca ProOne - Patient Positioning for Panoramic Exposure

Chapter B: SETTINGS 3 PROGRAM SETTINGS
Technical manual Planmeca ProOne 43
3 PROGRAM SETTINGS
On the Program settings display you can activate new program features and adjust default
settings for exposure programs. Here you can also specify how the X-ray unit will function
after an exposure has been taken.
NOTE
The option Imaging without PC will be shown on the display only if a USB memory stick is
connected to the X-ray unit.
The available options are described in detail on the following pages.
Exit the
Program settings display by touching the green check mark button in the bottom
right corner of the display.