Planmeca ProOne - Selecting Patient Size and its Impact

2 USER SETTINGS Chapter B: SETTINGS
36 Planmeca ProOne Technical manual
2.3 User: Operational settings (U1300)
To adjust the frequency of the exposure warning signal, calibrate the touch panel or to
enter practice mode, first select the option Operational settings (U1300) on the
User
settings
display. The Operational settings (U1300) display will appear.
• Exposure alarm settings
First touch and hold the
Test button to hear the current frequency of the radiation
warning tone. Then use the arrow buttons to adjust the frequency between 500 Hz
(low pitch tone) and 2000 Hz (high pitch tone) and test the frequency again.
Down
Up