Chapter B: SETTINGS 2 USER SETTINGS
Technical manual Planmeca ProOne 35
2.2 User: Select language (U1200)
To change the language of the control panel displays, first select the option Select
language (U1200) on the
User settings
display. The
Select language (U1200)
display will
appear.
Select the language of your choice. The selected language will be shown highlighted.
The information behind the
Technical
tab is always shown in English (regardless of the
language selection on the
Select language (U1200)
display).
Accept your selection by touching the green check mark button in the bottom right corner
of the display. To exit the display without saving the changes, touch the red cross button in
the bottom left corner of the display.
To Next Page
Loading...
Need help?
General
