Planmeca ProOne - Patient Positioning for Multi-angle TMJ Exposures

Chapter B: SETTINGS 4 TECHNICAL SETTINGS
Technical manual Planmeca ProOne 57
4.1 Technical: Mode (T3100)
To select the operating mode of the X-ray unit, first select the option Mode (T3100) on the
Technical settings display. The Mode (T3100) display will appear.
• Normal mode
Touch the
Normal mode field to switch normal operating mode on. When normal
mode is in use the
Normal mode field is shown highlighted.
• Practice mode
Practice mode enables the user to practice and demonstrate program functions
available on the X-ray unit. In practice mode no radiation is generated when the
exposure button is pressed and there is no connection to a computer. The C-arm will
move normally but no radiation will be generated and no radiation warning signals will
be given, i.e. this is a “dummy run” function for training and demonstration purposes.
For example, users might want to demonstrate the C-arm movements before taking
exposures of children or nervous patients.
Touch the
Practice mode field to switch practice mode on. When practice mode is in
use the
Practice mode field is shown highlighted and symbols indicating that radiation
and PC connection are disabled will appear in the status bar on all displays.
To switch practice mode off, touch the
Normal mode field.