Planmeca ProOne - Setting Imaging Position for Cross-sectional Exposures

1 GENERAL ABOUT SETTINGS Chapter B: SETTINGS
32 Planmeca ProOne Technical manual
1.1 Contents of the function tabs
User tab: User settings (no password required)
• Set time and date (U1100)
• Select language (U1200)
• Operational settings (U1300)
• Network settings (U1400)
• Component information (U1500)
• Clinic Management (U1600)
Program tab: Program settings (no password required)
• Program licences (P2100)
• Program presets (P2200)
• Functions after exposure (P2300)
• Archive (P2400)
• Testing programs (P2500)
• Imaging without PC (P2600)
Technical tab: Technical settings (password 1701 required)
• Mode (T3100)
• Exposures (T3200)
• Troubleshooting (T3300)
• Calibrations (T3400)
• Update software (T3500)
• Factory default settings (T3600)
• User-specific settings (T3700)