PowerTech 6105HF - Page 184

Cylinder Block, Liners, Pistons, and Rods
02
030
42
RG,RG34710,128 –19–03AUG99–2/2
IMPORTANT: The centerline of the main bearing
bore-to-top deck of cylinder block
MUST be 429.92–430.07 mm (16.926–
16.932 in.). If not, replace cylinder
block.
3. Measure cylinder liner bores in block and compare to
the following specifications.
Cylinder Block Bore for Seating Liner—Specification
Liner Flange Counterbore—ID 153.57—153.77 mm
(6.046—6.054 in.)
..................................
Upper Block Bore for Seating
Liner—ID 145.845—145.895 mm
(5.7419—5.7439 in.)
................................................................
Lower Block Bore for Seating
Liner—ID 140.465—140.515 mm
(5.5301—5.5321 in.)
................................................................
CTM100 (06APR04) 02-030-42 P OWER T ECH 10.5 L & 12.5 L Diesel Engines
040604
PN=182