PowerTech 6105HF - Air Intake and Exhaust System (Group 080) Specifications

Repair and General OEM Specifications
06
200
23
OUO1004,0000BDA –19–03NOV00–1/1
Air Intake and Exhaust System (Group 080)
Specifications
Item Measurement Specification
Garrett Turbocharger Shaft Radial Bearing Clearance (Allowable 0.076—0.165 mm (0.003—0.0065
Movement) in.) (measured on center of shaft)
Borg Warner Turbocharger Shaft Radial Bearing Clearance (Allowable 0.56—0.81 mm (0.022—0.0.032 in.)
Movement) (measured on end of shaft)
Garrett Turbocharger Axial Bearing End Play 0.025—0.114 mm (0.0010—0.0045
in.)
Borg Warner Turbocharger Axial End Play 0.0635—0.1143 mm (0.0025—
Bearing 0.0045 in.)
Turbocharger-to-Exhaust Manifold Torque 50 N•m (37 lb-ft)
Turbocharger Oil Inlet Fitting Torque 50 N•m (37 lb-ft)
Turbocharger Oil Return Torque 50 N•m (37 lb-ft)
Pipe-to-Turbocharger
Turbocharger Oil Inlet Line (Both Torque 35 N•m (26 lb-ft)
Ends)
Exhaust Manifold-to-Head Cap Torque 70 N•m (52 lb-ft)
Screws
Intake Manifold-to-Cylinder Head Torque 35 N•m (26 lb-ft)
Cap Screws
Aftercooler-to-Cylinder Head Cap Torque 35 N•m (26 lb-ft)
Screws
Aftercooler Tube Clamp Cap Screw Torque 50 N•m (37 lb-ft)
(or Cap Screw with Nut)
Aftercooler Test Pressure 140—170 kPa (1.4—1.7 bar) (20—
25 psi)
CTM100 (06APR04) 06-200-23 P OWER T ECH 10.5 L & 12.5 L Diesel Engines
040604
PN=433