Repair and General OEM Specifications
06
200
5
OUO1004,0000BC6 –19–19SEP02–1/4
Cylinder Head and Valves (Group 020)
Specifications
Item Measurement Specification
Rocker Arm Cover Hold-Down Cap Torque 30 N•m (22 lb-ft)
Screws
1
Crankcase Vent Baffle-to-Rocker Torque 15 N•m (11 lb-ft) (133 lb-in.)
Arm Cover Cap Screws
Valve Stem-to-Bridge Clearance
(Engine Cold)
Intake Valve Clearance 0.58 ± 0.05 mm (0.023 ± 0.002 in.)
Exhaust Valve Clearance 1.08 ± 0.05 mm (0.043 ± 0.002 in.)
Intake and Exhaust Valve Adjusting Torque 50 N•m (37 lb-ft)
Screw Lock Nuts
Electronic Unit Injector Preload 0.00 mm (in.) clearance plus 1/2 turn
in (180°)
Electronic Unit Injector Adjusting Torque 65 N•m (48 lb-ft)
Screw Lock Nuts
Timing Pin Plug (Below Oil Cooler) Torque 33 N•m (24 lb-ft)
Rocker Arm Bushing ID 38.064 ± 0.013 mm (1.4986 ± 0.0005
in.)
Rocker Arm Shaft OD 38.000 ± 0.013 mm (1.4961 ± 0.0005
in.)
Rocker Arm Shaft-to-Bushing Oil Clearance 0.064 ± 0.026 mm (0.0025 ± 0.0010
in.)
Rocker Arm Shaft Intake and OD 39.995—40.045 mm (1.5746—
Exhaust Roller 1.5766 in.)
Rocker Arm Shaft Unit Injector Roller OD 37.995—38.045 mm (1.4959—
1.4978 in.)
Intake and Exhaust Valves Recess 1.85—2.35 mm (0.073—0.093 in.)
1
Tighten center cap screw first, then tighten sides.
CTM100 (06APR04)
06-200-5
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=415
Continued on next page
To Next Page
Loading...
General