Repair and General OEM Specifications
06
200
6
OUO1004,0000BC6 –19–19SEP02–2/4
Item Measurement Specification
Intake and Exhaust Valve Springs Height at0N(0lb-force) Free 67.9—72.1 mm (2.67—2.84 in.)
(All)
2
Length
Intake and Exhaust Valve Springs Height at 352—396 N (79—89 59.4 mm (2.34 in.)
(R116585) lb-force) (Valve Closed)
Intake and Exhaust Valve Springs Height at 845—935 N (190-210 45.5 mm (1.79 in.)
(R116585) lb-force) (Valve Open)
Intake and Exhaust Valve Springs Height at 527—593 N (118—133 59.4 mm (2.34 in.)
(R133891) lb-force) (Valve Closed)
Intake and Exhaust Valve Springs Height at 1187—1313 N (267—295 46.4 mm (1.83 in.)
(R133891) lb-force) (Valve Open)
Intake and Exhaust Valve Stems OD 8.999 ± 0.013 mm (0.3543 ± 0.0005
in.)
Intake and Exhaust Valve Face
3
Maximum Runout 0.038 mm (0.0015 in.)
Intake and Exhaust Valve Head OD 46.35—46.61 mm (1.825—1.835 in.)
Intake and Exhaust Valve Face Angle 29.25°±0.25°
Cylinder Head Maximum Acceptable Out-of-Flat for 0.10 mm (0.004 in.)
Entire Length of Head
Maximum Acceptable Out-of-Flat for 0.025 mm (0.0009 in.)
Every 305 mm (12.0 in.)
Cylinder Head (Rocker Arm New Part Thickness 124.975—125.025 mm (4.9203—
Cover-to-Combustion Face) 4.9222 in.)
Minimum Acceptable Thickness 124.840 mm (4.9150 in.)
Cylinder Head (Rocker Arm Minimum Overall Thickness 124.840 mm (4.9150 in.)
Cavity-to-Combustion Face)
Cylinder Head Combustion Face Surface Finish 1.5—2.8 micrometers (60—110
Surface Finish (Surface Mill Only) micro-in.)
(AA)
2
Free length of springs may vary slightly between springs.
3
Maximum runout measured at 44 mm (1.73 in.) diameter.
CTM100 (06APR04)
06-200-6
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=416
Continued on next page
To Next Page
Loading...
General