Repair Tools and Other Materials
OUO1004,0000BD5 –19–02NOV00–2/2
Snap-On Dowel Pin Puller Set ..............CG503
Remove fuel supply pump drive pin from end of camshaft.
05
170
24
OUO1004,0000BD6 –19–02NOV00–1/1
Camshaft and Timing Gear Train (Group 050)
Other Material
Number Name Use
T43512 (U.S.) Thread Lock and Sealer (Medium Apply to idler gear carrier cap
TY9473 (Canadian) Strength) screws, camshaft gear retainer cap
242 (LOCTITE
) screws and fuel supply pump drive
coupler cap screws.
TY6333 or TY6347 (U.S.) High Temperature Grease Coat cam roller followers, camshaft
lobes, journals, and bushings during
installation. Coat idler gear and
bushing during installation.
LOCTITE is a registered trademark of Loctite Corp.
CTM100 (06APR04)
05-170-24
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=398
To Next Page
Loading...