Fuels, Lubricants and Coolant
01
002
4
DX,ENOIL4 –19–07NOV03–1/1
Diesel Engine Break-In Oil
New engines are filled at the factory with John Deere
ENGINE BREAK-IN OIL. During the break-in period, add
John Deere ENGINE BREAK-IN OIL as needed to
maintain the specified oil level.
Change the oil and filter after the first 100 hours of
operation of a new or rebuilt engine.
After engine overhaul, fill the engine with John Deere
ENGINE BREAK-IN OIL.
If John Deere ENGINE BREAK-IN OIL is not available,
use a diesel engine oil meeting one of the following during
the first 100 hours of operation:
• API Service Category CE
• API Service Category CD
• API Service Category CC
• ACEA Oil Sequence E2
• ACEA Oil Sequence E1
After the break-in period, use John Deere PLUS-50 or
other diesel engine oil as recommended in this manual.
IMPORTANT: Do not use PLUS-50 oil or engine oils
meeting any of the following during the
first 100 hours of operation of a new or
rebuilt engine:
API CI-4 ACEA E5
API CH-4 ACEA E4
API CG-4 ACEA E3
API CF-4
API CF-2
API CF
These oils will not allow the engine to
break-in properly.
PLUS-50 is a trademark of Deere & Company
CTM100 (06APR04)
01-002-4
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=34
To Next Page
Loading...