PowerTech 6105HF - Camshaft and Timing Gear Train (Group 050) Specifications

Repair and General OEM Specifications
06
200
17
OUO1004,0000BD7 –19–02NOV00–1/2
Camshaft and Timing Gear Train (Group 050)
Specifications
Item Measurement Specification
Camshaft Gear Retainer Initial Torque 100 N•m (74 lb-ft)
Plate-to-Camshaft Second Torque 150 N•m (110 lb-ft)
Final Retorque 150 N•m (110 lb-ft)
Camshaft Gear-to-Upper Idler Gear Backlash 0.13 mm (0.005 in.)
Oil Pump Gear-to-Upper Idler Gear Backlash 0.25 mm (0.010 in.)
Upper Idler Gear Bearing Torque 85 N•m (63 lb-ft)
Cup-to-Block
Upper Idler Gear Thrust Plate Cap Initial Torque 35 N•m (26 lb-ft)
Screws
Upper Idler Gear Thrust Plate Cap Final Torque 35 N•m (26 lb-ft)
Screws
Camshaft and Supply Pump Drive Torque 4 N•m (3 lb-ft)
Coupler Set Screw
Fuel Supply Pump-to-Cylinder Head Torque 50 N•m (37 lb-ft)
Camshaft Thrust Ring-to-Head Torque 35 N•m (26 lb-ft)
Camshaft Position Sensor Torque 14 N•m (10 lb-ft)
Camshaft Journal OD 101.987—102.013 mm (4.0152—
4.0162 in.)
Camshaft Bushing ID 102.091—102.167 mm (4.0193—
4.0223 in.)
Camshaft Journal-to-Bushing Oil Clearance 0.078—0.180 mm (0.0031—0.0071
in.)
Camshaft Bushing Bore in Head 105.987—106.013 mm (4.1727—
4.1737 in.)
Camshaft Lobe:
Intake Lobe Lift 8.73—8.99 mm (0.343—0.353 in.)
Exhaust Lobe Lift 7.93—8.19 mm (0.312—0.322 in.)
CTM100 (06APR04) 06-200-17 P OWER T ECH 10.5 L & 12.5 L Diesel Engines
040604
PN=427
Continued on next page