Repair Tools and Other Materials
05
170
20
OUO1004,0000BD2 –19–02NOV00–1/1
Crankshaft, Main Bearings and Flywheel
(Group 040) Other Material
Number Name Use
(U.S.) Brake Kleen or Ignition Cleaner Remove sealant from crankshaft
flange.
(U.S.) PLASTIGAGE

Check main bearing-to-crankshaft
journal oil clearance during engine
disassembly.
TY15969 (U.S.) Retaining Compound (Maximum Coat OD of crankshaft flange for
TY9479 (Canadian) Strength) installation of rear oil seal/wear
680 (LOCTITE

) sleeve. Coat ID of front wear sleeve
prior to installation.
TY16285 (U.S.) Clean and Cure Primer Clean sealant from mating gasket
surfaces on timing gear cover and
camshaft gear access cover.
T43512 (U.S.) Thread Lock and Sealer (Medium Apply to both sides of timing gear
TY9473 (Canadian) Strength) cover gasket and to camshaft gear
242 (LOCTITE

) access cover gasket on earlier
engines using Fel-Pro gaskets.
TY6304 (U.S.) Flexible Sealant Apply to timing gear cover gasket
TY9484 (Canadian) and camshaft gear access cover
515 (LOCTITE

) gasket on earlier engines using
Fel-Pro gasket.
PLASTIGAGE is a registered trademark of DANA Corp.
LOCTITE is a registered trademark of Loctite Corp.
CTM100 (06APR04)
05-170-20
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=394
To Next Page
Loading...
General