Lubrication System
02
060
14
RG,RG34710,218 –19–13AUG99–1/1
Remove and Install Oil Pickup Tube
RG8122 –UN–20NOV97
Oil Pickup Tube
A—Pickup Tube
1. Remove engine oil pan. (See REMOVE ENGINE OIL
PAN earlier in this group.)
NOTE: On engine option code 1903, oil pickup tube is
mounted on the oil pan with two cap screws.
2. Remove three cap screws securing pickup tube to
cylinder block and remove tube assembly with gasket.
3. Clean pickup tube and screen completely with solvent.
Dry with compressed air.
4. Inspect pickup screen for damage or holes. Inspect
tube for weld breaks, bends, or any other damage.
Replace as necessary.
5. Install pickup tube assembly to cylinder block using a
new gasket. Tighten cap screws to specifications.
Specification
Oil Pickup Tube-to-Block Cap
Screws—Torque 35 N•m (26 lb-ft)..............................................................
Oil Pickup Tube-to-Oil Pan Cap
Screws—Torque 25 N•m (18 lb-ft)..............................................................
CTM100 (06APR04)
02-060-14
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=282
To Next Page
Loading...
General