Repair and General OEM Specifications
06
200
19
OUO1022,000000A –19–19SEP02–1/2
Lubrication System (Group 060)
Specifications
Item Measurement Specification
New Oil Pressure Regulating Valve Free Length 86.4 mm (3.40 in.)
Spring Working Load at 76—84 N (17—19 42.0 mm (1.65 in.)
lb-force)
Oil Pressure Regulating Valve Plug Torque 100 N•m (74 lb-ft)
New Oil Cooler Bypass Valve Spring Free Length 44.0 mm (1.73 in.)
Working Load @ 64—78 N (14—18 30.0 mm (1.18 in.)
lb-force)
New Oil Filter Bypass Valve Spring Free Length 44.0 mm (1.73 in.)
Working Load @ 64—78 N (14—18 30.0 mm (1.18 in.)
lb-force)
Oil Cooler Bypass Valve Plug Torque 100 N•m (74 lb-ft)
Oil Filter Bypass Valve Plug Torque 100 N•m (74 lb-ft)
Oil Pressure Relief Valve Spring Free Length 79.0 mm (3.11 in.)
Working Load @ 196—222 N (44— 65.0 mm (2.56 in.)
50 lb-force)
Oil Cooler Test Pressure 140—170 kPa (1.4—1.7 bar) (20—
25 psi)
Oil Cooler-to-Housing Nuts Torque 50 N•m (37 lb-ft)
Oil Cooler Drain Cock Handle Torque 3 N•m (25 lb-in.)
Oil Cooler Expansion Plug Installed Depth Flush to 1.5 mm (0.059 in.) Below
Surface
Oil Cooler Housing-to-Block Cap Torque 68 N•m (50 lb-ft)
Screws
Oil Cooler Housing-to-Block Cap Retorque 68 N•m (50 lb-ft)
Screws
Oil Filter/Valve Housing or Oil Cooler Torque 68 N•m (50 lb-ft)
Cover/Valve Housing
1
1
Torque sequence and specification also applies to oil cooler cover/valve
housing on remote filter applications.
CTM100 (06APR04)
06-200-19
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=429
Continued on next page
To Next Page
Loading...