Repair and General OEM Specifications
06
200
14
OUO1004,0000BD3 –19–19SEP02–1/3
Crankshaft, Main Bearings and Flywheel
(Group 040) Specifications
Item Measurement Specification
Vibration Damper Maximum Radial Runout 0.76 mm (0.030 in.)
Crankshaft End Play 0.038—0.380 mm (0.0015—0.0150
in.)
SAE 1 Flywheel Housing Maximum Face Deviation 0.30 mm (0.012 in.)
Maximum Bore Eccentricity 0.30 mm (0.012 in.)
SAE 2 Flywheel Housing Maximum Face Deviation 0.28 mm (0.011 in.)
Maximum Bore Eccentricity 0.28 mm (0.011 in.)
SAE 0 Flywheel Housing Maximum Face Deviation 0.41 mm (0.016 in.)
Maximum Bore Eccentricity 0.41 mm (0.016 in.)
Flywheel Face Flatness Maximum Variation 0.23 mm (0.009 in.)
Maximum Variation per 25 mm (1.0 0.013 mm (0.0005 in.)
in.) of Travel
Flywheel Housing-to-Cylinder Block Torque 325 N•m (240 lb-ft)
Cap Screws (SAE 1 With Rear PTO)
Flywheel Housing-to-Cylinder Block Torque 365 N•m (270 lb-ft)
Cap Screws (SAE 0, 1 and 2 Without
Rear PTO)
Flywheel Housing Front Plate Cap Torque 50 N•m (37 lb-ft)
Screws
Flywheel Housing Timing Hole Cover Torque 5 N•m (44 lb-in.)
Cap Screws
Starter Motor Cap Screws Torque 125 N•m (92 lb-ft)
Flywheel-to-Crankshaft Cap Screws Torque 170 N•m (125 lb-ft)
Crankshaft Main Bearings Main Bearing-to-Journal Clearance 0.046—0.122 mm (0.0018—0.0048
in.)
Maximum Acceptable Oil Clearance 0.152 mm (0.0060 in.)
Crankshaft Main Bearing ID With Bearing 125.071—125.127 mm (4.9241—
4.9263 in.)
ID Without Bearing 133.097—133.123 mm (5.2400—
5.2411 in.)
CTM100 (06APR04)
06-200-14
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=424
Continued on next page
To Next Page
Loading...