Crankshaft, Main Bearings, and Flywheel
02
040
17
RG,RG34710,162 –19–13AUG99–2/2
RG8125A –UN–20NOV97
Bearing Cap Puller and Slide Hammer
RG8128 –UN–21MAY98
Main Bearing Cap Assembly Removed
A—D01300AA Slide Hammer
8. Attach D01300AA Slide Hammer (A) to cross block,
tighten nut securely.
9. Remove main bearing cap by sliding up on hammer
weight.
10. Use PLASTIGAGE
to measure journal-to-bearing oil
clearance on each main bearing as they are removed.
(See CHECK MAIN BEARING-TO-JOURNAL OIL
CLEARANCE, later in this group.)
PLASTIGAGE is a registered trademark of DANA Corp.
CTM100 (06APR04)
02-040-17
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=213
To Next Page
Loading...