Camshaft and Timing Gear Train
02
050
11
RG,RG34710,191 –19–25OCT00–5/14
RG8822B –UN–11DEC97
Removing Supply Pump Drive Coupler
A—Fuel Supply Pump and Mounting Bracket
B—Supply Pump Drive Coupler
8. Remove fuel supply pump and mounting bracket (A)
from rear of cylinder head.
9. Remove supply pump drive coupler (B) from drive pin
in rear of camshaft.
RG,RG34710,191 –19–25OCT00–6/14
RG8289A –UN–06DEC97
Installing JDG972 Camshaft Pilot
A—Camshaft Pilot
10. Install JDG972 Camshaft Pilot (A) onto rear face of
camshaft. Tighten two set screws securely. Lubricate
pilot with clean engine oil or multipurpose grease.
Continued on next page
CTM100 (06APR04)
02-050-11
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=251
To Next Page
Loading...