Air Intake and Exhaust System
02
080
22
RG,RG34710,250 –19–03NOV00–2/2
4. Apply PT569 NEVER-SEEZ
Compound to intake
manifold cap screws. Starting at center cap screws,
alternating top to bottom and front to rear, tighten
intake manifold-to-cylinder head cap screws to
specifications.
Specification
Intake Manifold-to-Cylinder Head
Cap Screws—Torque 35 N•m (26 lb-ft)......................................................
5. If required, connect fuel lines to final fuel filter
mounting base. Install final fuel filter.
6. Reconnect intake piping, sensors, and starting aid
detailed in machine technical manual.
NEVER-SEEZ is a registered trademark of Emhart Chemical Group
CTM100 (06APR04)
02-080-22
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=322
To Next Page
Loading...