Air Intake and Exhaust System
02
080
24
RG,RG34710,251 –19–13AUG99–2/2
4. If removed, install inlet and outlet tube clamps and
tighten cap screws (or cap screw with nut) to
specifications.
Specification
Aftercooler Tube Clamp Cap
Screw (or Cap Screw with Nut)—
Torque 50 N•m (37 lb-ft).............................................................................
5. Install air inlet adapter onto aftercooler inlet and tighten
securely.
6. Fill cooling system with proper coolant solution.
7. Refer to machine technical manual to connect sensors
and starting aid.
CTM100 (06APR04)
02-080-24
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=324
To Next Page
Loading...