Repair Tools and Other Materials
OUO1004,0000BD0 –19–02NOV00–4/9
RG8513 –UN–13AUG99
JDG1020
Rear Crank Seal Sleeve Remover .........JDG1020
Use to remove the rear seal assembly and seal housing.
Tool helps protect the flange on rear of crankshaft.
05
170
17
OUO1004,0000BD0 –19–02NOV00–5/9
RG8521 –UN–20MAY98
JDG996
Main Bearing Cap Puller/Installer ...........JDG996
Use to remove and install the main bearing caps. Due to
wider bearing surface, these caps are installed with an
increased interference fit.
OUO1004,0000BD0 –19–02NOV00–6/9
RG8510 –UN–20MAY98
JDG977
Timing Gear Cover/Rear Seal Housing Oil Pan Rail
Aligner ............................JDG977
Use to align the timing gear cover to the engine block oil
pan mounting surface and align the rear seal housing to
the same surface. When installing the timing gear seal
housing, use JDG975 Timing Gear Cover/Rear Crankshaft
Housing Centering Tool to center the seal housing bores
with the crankshaft flange.
Continued on next page
CTM100 (06APR04)
05-170-17
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=391
To Next Page
Loading...