Dealer Fabricated Service Tools
05
190
2
RG,RG34710,277 –19–30SEP97–1/1
DFRG3—Cylinder Liner Holding Fixture
T36748N –UN–24OCT88
DFRG3 Liner Holding Fixture
1—254.0 mm (10 in.) 8—31.8 mm (1.25 in.) 14—5/16 in.–18 Tap 20—111.25 mm (4.38 in.)
2—127.0 mm (5 in.) 9—63.5 mm (0.25 in.) 15—2 used 21—60.45 mm (2.38 in.)
3—38.1 mm (1.5 in.) 10—25.4 mm (1 in.) 16—304.8 mm (12 in.) 22—5/16 in. [times ] 1 in. Cap
4—405.4 mm (16 in.) 11—6.35 mm (0.25 in.) 17—5/16 in.–18 Tap Screw
5—330.2 mm (13 in.) 12—152.4 mm (6 in.) 18—69.85 mm (2.75 in.) Radius 23—38.1 mm (1.5 in.) Angle
6—9.52 mm (0.38 in.) 13—0.328 in. Drill Through 19—101.6 mm (4 in.) Iron
7—12.7 mm (0.5 in.)
CTM100 (06APR04)
05-190-2
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=408
To Next Page
Loading...