Cylinder Head and Valves
02
020
15
RG,RG34710,65 –19–13AUG99–4/5
NOTE: Cylinder head can be removed without removing
camshaft.
IMPORTANT: If cylinder head is removed with
camshaft installed, secure camshaft in
bushings with DFRG4 Camshaft
Locking Tool (E) so that camshaft
journals and bushings are not damaged
by camshaft sliding out of bushings.
(See DFRG4-CAMSHAFT LOCKING
TOOL in Section 05, Group 190 for
details on this dealer fabricated tool.)
Camshaft position sensor MUST BE
removed from air intake side of cylinder
head when removing or installing
camshaft to prevent camshaft binding
on sensor.
13. Remove camshaft front thrust ring. Remove camshaft
position sensor and remove camshaft if desired (see
REMOVE AND INSTALL CAMSHAFT in Group 050).
Continued on next page
CTM100 (06APR04)
02-020-15
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=87
To Next Page
Loading...