Section 18: BODY
PA1562
16
6 GENERAL DESCRIPTION
The following procedures explain the steps to be followed for proper repair, installation and replacement
for various doors, panels and windows. The paragraph divides the vehicle into zones to facilitate the
search; each zone is then sub-divided into components.
Refer to the appropriate zone then component for complete procedure.
FIGURE 7: X3 COACHES ZONING 18623
7 ZONE 1
FIGURE 8: ZONE 1 18624
7.1 FRONT BUMPER
The front bumper is hinged to give access to the
spare wheel and tire compartment. Pull the
handle located in the front service compartment
to open the spare wheel and tire compartment.
Bumper must first be tilted down before its
removal. Two people are required to remove
To Next Page
Loading...
