Section 18: BODY
PA1562
51
SECTION 2 PREPARATION OF SURFACES
VEHICLE SURFACE PREPARATION
A) Clean using "anti-silicone" until all clothes come
clean.
See PR000001 section A.
B) Use the belt sander (grit coarse)
Use a new paper on each vehicle side.
C) Clean using "anti-silicone" until all clothes come
clean.
See PR000001 section A.
2.00
D) Apply – Sika 205
See PR000001 section B.
SIDE PANEL PREPARATION
A) Clean using “anti-silicone” until all clothes come clean.
See PR000001 section A.
B) Use the belt sander (grit coarse)
Use a new paper on each vehicle side panel.
C) Clean using “anti-silicone” until all clothes come clean.
See PR000001 section A.
2.05
D) Apply – Sika 205
See PR000001 section B.
PR000001 Section A Alcohol or Anti-silicone
1. Apply
2. Dry immediately
3. Allow to dry
Minimum time : Wait for product to evaporate Mandatory
After 2 hours: Start cleaning operation again
Before applying any other
product
If surface seems dusty, greasy or with finger marks, start
cleaning operation again.
CHIX cloth Blue cloth
To Next Page
Loading...
