Section 18: BODY
PA1562
56
Finition Joint
A) Install a protective tape onto the tubing above welding
B) Apply Sika 205
Use a plastic spatula inside a Chix cloth to ensure
that Sika 205 reaches as far as the corner.
See PR000001 section B.
C) Apply Sika 252 black at the junction of both tubing.
Smooth down the joint
5.00 *
D) Remove protective tape
13.2 SIDE CREST
FIGURE 41: SIDE CREST POSITIONING 18639
• Clean vehicle surface using anti-silicone where the side crest and stickers will be applied.
• Using hands apply and compress side crest.
• Apply required stickers.
To Next Page
Loading...
